It holds any electronic products that weigh less than 3 kg, such as camcorders, DSLRs, smartphones, and tablets. It can also be used as a flashlight or microphone stand.
A ball head with a quick release plate allows you to mount any electronic product quickly. The ball head pans 360 degrees. You can also install a heavier ball head for a higher load capacity.
The maximum load capacity of the clamp is 40 kg. The clamp is made of aluminum alloys for aerospace applications and only half the size of an iPad. For this reason, the clamp is much lighter but stronger than other similar products.
The cubic jaws have three types of surfaces (x groove, checkered groove and smooth surface) and make the clamp more stable and easier to cling to an object.
A soft plastic handle and a precise screw allow you to tighten up the clamp easily.
An easy-to-store stand provides a firm support for the clamp.
Holds fast and
never gets loose
Clamp body x 1, Ball head x 1, Smartphone holder(Basic) x 1,
Inner jaw x 1, Pouch x 1, Stand x 1, G1 x 1
Extended: 15 x 11.5 x 16.4 cm
Folded: 15 x 4x 17.3 cm
284 g(Include Ball head)
T1: Aluminum alloys for aerospace applications, Glass-fiber reinforced nylon
G1: Aluminum Alloy
Ø4 - Ø50 mm
Flat surface: 1 - 50 mm
Quick release screw:
Clamp body load capacity:
Ballhead load capacity:
*The maximum load capacity of Takeway® T1 clamp body is 40 kg (including ball head), but the maximum load capacity of the ball head alone depends on the ball head’s design.
*The design and specifications of this product are subject to change without notice. Please follow updates on our website.
T1 Clampod Combined with G1 TripodTakeway® T1 Plus Clampod features both the strong clamping force of T1 Clampod and the sturdy standing of G1 Tripod.
Main body – Made of aluminum alloys for aerospace applicationsThe main body is made of aluminum alloys for aerospace applications. This makes Takeway® T1 Plus ultra-lightweight, compact and therefore portable. At the same time it remains a great clamping force. It is easy to fasten and stable. Its great load capacity enhances its practicality and helps you create multimedia contents easily from different angles and on the move.
Ball head made of aluminum alloys for aerospace applicationsThe clampod is equipped with a lightweight ball head, a quick release plate, and clamp. It is sturdy and strong and therefore can be used for most digital cameras and small DSLRs. The maximum load capacity of the ball head is 3 kg (Static)/300 g (Dynamic). It will not get loose even on the move. The ball head knob has an ergonomic design, which enables easy screw-in.
JawsThe cubic jaws offer a rotatable tip with three different types of surfaces: X groove, checkered groove, and smooth surface. You can choose an appropriate side of the tips for a matching surface of the clamped object to make clamping easier and more secure. Therefore, you can easily keep the mounted device stable even on an irregular surface.
Disc handleAn ergonomic disc handle made of soft plastic is easy to use. With the attached precise screw, you can easily and quickly screw in and tighten up the clamp.
Inner JawEquipped with this inner jaw, Takeway® T1 Plus can be easily clamped onto any cylindrical objects. As the image shows, the star mark indicates that it can clamp onto cylindrical objects, of which the diameter is between 16mm and 30mm.
Smartphone holderIt can be used for holding a camera or a smartphone. The smartphone holder is compatible with iPhone (6, 7, 8, 8Plus, X, X Max, XR), Samsung (Note 9, Galaxy series), Asus Zenfone series, Sony Xperia series, HTC, LG, Huwei, Pixel.and any other smartphones with screen sizes between 4” and 6.5” and max. 9 cm wide. The holder has two screw holes compatible with camera screws, one at the back and the other at one side.
PouchThe gift pouch is for the clampod or your paraphernalia.
What is the maximum load capacity of Takeway® T1 Plus? Can I mount a large camera on it?
The maximum load capacity of the main body of Takeway® is 40 kg (including ball head), and it can support most DSLRs. Yet, the load capacity of the ball head depends on its design. Please consult the relevant document for the load capacity of the ball head you are using.
How long will the warranty of Takeway® T1 Plus last and what are the conditions?
We provide you with a full one-year warranty for any purchase of our products. However, the warranty does not cover the following situations.
1.A product cannot be proved to be the product of Takeway®.
2.The warranty period cannot be proved, or the manufactured date cannot be identified because it is erased or changed.
3.The product is damaged by natural disasters (flood, fire, earthquake, lightning strike, hurricane/typhoon, etc.), man-made damage (scratching, falling, broken screws, knocking, hitting, etc), personal negligence (missing, improper storage, etc) and other unusual causes.
4.The product is not used for its originally designed purposes, or has been altered by any individuals after the purchase.
5.The damage is caused by a user’s or a third party’s installing, adding, switching, or repairing the product with parts not authorized by Takeway®.
6.The damage of accessories (such as smartphone holder, pouch, base) and expendable parts.
7.The product or accessory is purchased from an unauthorized dealer.
8.The damage or loss is caused directly or indirectly by actions, conditions, and environments that are not approved or acknowledged in the user guide released by Takeway® or in relevant technical documents.
If you need further information or assistance, please feel free to contact:
Ms. Silver Chen